Submersible pressure transmitter for level measurement (LS-10), activ output (4-20mA)

SKU: LS-10

Category: Pressure

robust, reliable, economical
Level measurement in rivers and lakes
Level measurement in vessel and storage systems
Control of sewage lift and pumping stations

Output: 4-20 mA
Pressure: 0...0,25 bar

0...0,4 bar

0...0,6 bar

0...1 bar

0...1,6 bar
Cable: 20 m

5 m

from 498,57 €

incl. 19% VAT , plus

This item has variations. Please select the requested variation.

The submersible pressure transmitter has been optimised for simple measuring requirements in level measurement. It offers excellent quality, is cost-effective and reliable. It has been designed to the current demands of the industry and has a 4 ... 20 mA output as standard, an accuracy of 0.5% and PUR cable. With IP 68 ingress protection, it is suitable for permanent level measurement up to 100 m water column. The submersible pressure transmitter features a hermeticallysealed and exceptionally robust stainless steel case. The proven, fully-welded construction ensures a long service life and permanent sealing.

Manufacturer information:

WIKA Alexander Wiegand SE & Co. KG

Alexander-Wiegand-Str. 30
63911 Klingenberg

Tel.: +49 9372 132-0

E-Mail: info@wika.de

Reference conditions:	Temperature 15...25°C; Air pressure 860-1060 mbar; Humidity 45-75% r.h.; Power supply 24 V DC
Repeatability:	≤ ± 0.1% of the span
Temperature dependency:	Average temperature coefficient of the zero point; Measuring ranges ≤ 0.25 bar; ≤ ± 0.4% of the span / 10 K; Measuring ranges> 0.25 bar; ≤ ± 0.2% of the span / 10 K; Average temperature coefficient of the span; ≤ ± 0.2% of the span / 10 K
Linearity inaccuracy:	≤ ± 0.2% of the span according to IEC 61298-2
Long term stability:	≤ ± 0.2% of the span / yearof the span / year
Burst pressure:	2,4
Measurement range pressure:	0...0,25 bar, 0...0,4 bar, 0...0,6 bar, 0...1 bar, 0...1,6 bar, 0...2,5 bar, 0...4 bar, 0...6 bar, 0...10 bar
Accuracy:	163/5000 ± 0.5% of the span under reference conditions, including non-linearity, hysteresis, zero point and end value deviation (corresponds to measurement deviation according to IEC 61298-2)
Sensor:	Stainless steel membrane, diving depth up to 100 m
Supply voltage analog 4-20 mA:	10...30 V DC
Current consumption at 4-20 mA:	ca. 30 mA
Analogue output 4-20 mA:	2-wire connection, max. RLoad(Ohm) = (+Ub - 10 V) / 0,02 A - (cable length in m x 0,14 Ω)
Electrical connection:	150/5000 5 m PUR cable, max. Tensile force without strain relief up to 350 N, with strain relief up to 1,000 N, short-circuit strength: S + against U; Reverse polarity protection: U + against U;
Isolation voltage:	DC 500 V
Material:	CrNi steel housing; CrNi steel sensor; Protective cap made of PA; PUR cables
Weight:	Pegelsonde ca. 180 g; Kabel ca. 80 g/m; Zusatzgewicht (Zubehör) ca. 500 g
Protection type:	IP68
Working temperature:	-10...+50°C
Ambient temperature:	-10...+50°C
Storage temperature:	-30...+80°C
Approvals:	CE, EAC, CSA, GOST-R
Overload pressure limit:	2