Differential Pressure Switch for overpressure, underpressure or differential pressure, for liquids with adjustable switching pressure, with changeover contact

SKU: FS3610

Category: Pressure

Manufacturer: FuehlerSysteme

liquid and gaseous ? also aggressive
max. 10 bar
with protection cap and mounting bracket
IP54

Output: 1 change-over contact
Differential pressure: 150...1000 mbar

40...200 mbar
Hysteresis: 100 mbar

30 mbar
Material: EPDM

NBR

Available immediately

225,22 €

incl. 19% VAT , plus

This item has variations. Please select the requested variation.

The adjustable differential pressure switch FS3610 is suitable for monitoring negative, positive or differential pressure in liquid and gaseous ? also aggressive - media. The robust solution finds its application in general process engineering. The pressure switch is suitable for operating pressures up to 10 bar (bursting pressure 20 bar). The setting of the switching pressure can be sensitively adjusted as needed via an easily accessible adjusting screw. There are two variants available with a differential pressure range 40 to 200 mbar and 150 to 1000 mbar. The temperature of the medium can be between -10 to + 80 °C. The connections are designed as AMP flat plugs according to DIN 46244, with dimensions of 6.3 x 0.8 mm. The differential pressure switch itself is - measured via the adjusting screw - only 88.6 mm long, with a diameter of 57 mm. With the attached protective cap, it meets the requirements of protection class IP54. The pressure ports are made of brass and have a G 1/8" female thread. The membrane material is made of NBR or EPDM. The service life is designed for over 1 million operations. The differential pressure monitor is supplied with an IP54 protective cap (cable gland M12) and a mounting bracket (L-shape). Class of control- and regulatory function: A

Pressure type:	positive, negative or differential pressure
Medium:	liquid and gaseous ? also aggressive
Measurement range pressure:	40...200 mbar, 150...1000 mbar
Pressure resistance:	10 bar
Repeatability:	±10%
Alarm output:	change-over contact, contact rating 6 (1,5) A at 250V AC
Switching Hysteresis Relay:	30 mbar (at 40...200 mbar); 100 mbar (at 150...1000 mbar);
Electrical breaking capacity:	1,5 A at 250V AC (low voltage version < 0,1 A, 24 V DC on request)
Electrical connection:	Tab terminal 6.3 mm x 0.8 mm according to DIN 46244
Burst pressure:	> 20 bar
Durability:	more than 1 Mio. switching operations
Material:	Membrane: NBR, EPDM (for aggressive media); Media contacting parts: Chrome / Stainless steel / Brass / Diaphragm material
Cable gland:	Connector, Shape A, to EN 175301-803
Weight:	850 g
Process connection:	Inner thread G 1/8 of Brass (CuZn40) for P1+ / P2?
Protection type:	IP54
Protection class:	II
Ambient temperature:	-10...+80°C
Working temperature:	-10...+80°C
Storage temperature:	-40...+80°C
Installation:	Mounting bracket L-shaped
Approvals:	CE, RoHS