L-STAT Room Operator Panel - 8 x Button with temperature up/ down, fan up/ down, sunblinds up/ down, light, and menu

SKU: LSTAT-80x-Gx-Lxx6

Category: Temperature

room operator panel device
8 x Button with temperature up/ down, fan up/ down, sunblinds up/ down, light, and menu
front in black or white
Modbus, NFC
Temperature, rel. Humidity, ext. switch/NTC, infrared receiver

Basic Functions: Modbus, NFC, temperature, rel. humidity, ext. switch/NTC, infrared receiver
occupancy: without

yes
CO2: without

yes
Color: black front, white enclosure

white front, white enclosure

from 210,63 €

incl. 19% VAT , plus

This item has variations. Please select the requested variation.

The L-STAT is a room operator panel device with a modern, minimalistic look that fits any interior design. It is directly connected to a LOYTEC controller with a Modbus interface such as LIOB-AIR or L-ROC. Up to 16 L-STAT devices can be connected to one controller to offer control at different locations in- or outside even for the largest rooms. The L-STAT is equipped with a segmented LCD display featuring an RGB backlight with adjustable color, offering a neat way to make the L-STAT match the interior color concept of an office building. Eight capacitive touch buttons are used to cycle through sensor values, display parameters, and adjust setpoints. Up to four external buttons can be accessed and processed by the controller. The L-STAT's internal sensors measure temperature, humidity, dew point, occupancy, and CO2 level. Sensor values can be displayed in SI or US units. Additionally, the date and time as well as the current level of eco-friendliness in the form of green leaves are also displayed on the LCD display. Parameters controlled by the controller's logic can be overridden on the L-STAT, such as for occupancy, air conditioning, and ventilation. A direct access mode is available to quickly adjust the most important setpoints e.g. for temperature and ventilation control. A buzzer provides acoustic feedback for the touch buttons and can also be used to indicate alarms and error states. To prevent unauthorized modifications, two access levels (end user, system integrator) are used, which are secured via 4-digit pin codes. Device replacement, firmware upgrade, and L-STAT configuration are performed with very little effort through the controller. The L-STAT device is represented in the controller by a simple data point interface, which can be directly connected to the IEC 61131 or IEC 61499 logic application and offers all common functions for data points such as alarming, scheduling, trending, historic filters, math functions, etc. Using an NFC tag, the L-STAT transmits the URL of the controller's web interface to mobile devices for more extensive control and administrative tasks. Last but not least, the L-STAT comes with a built-in infrared receiver for comfortable remote control of the room's lights, sunblinds and HVAC system via the optionally available IR remote control L-RC1. The L-STAT is available in three different hardware versions, with six different button layouts, and two front cover color options (36 models in total). Features - Modbus RTU interface for integration into controllers - Easy integration into LOYTEC controllers such as L-INX, L-ROC or LIOB-AIR - Segmented LCD display - LCD RGB backlight color can be adjusted via network - Display time and date - Symbols for eco-friendliness level (green leaves) - Up to 8 buttons (capacitive touch) - Temperature sensor - Humidity sensor - 3 digital inputs (dry contact) - 1 universal input (digital/NTC10k) - NFC (Near Field Communication) with content configurable via network - Buzzer to provide acoustic feedback for the touch buttons or to indicate alarms - Two access levels (end user, system integrator), which are secured via 4-digit pin codes - Enclosure color options black and white - Optional occupancy sensor (LSTAT-801 and LSTAT-802 models only) - Optional CO2 sensor (LSTAT-802 models only) - Optional EnOcean interface (custom models only) to work as remote EnOcean transceiver for LOYTEC controllers

General:
General - Dimensions (mm):	94.5 x 110 x 19.5 (L x W x H), DIM032
General - Installation:	Onto a flush-mounted box
General - Power supply:	LSTAT-800-Gx-Lxxx LSTAT-801-Gx-Lxxx / 24 V DC ±10 %, max. 0.8 W
General - Operating conditions:	0 °C to 50 °C, 10–90 % RH, noncondensing, degree of protection: IP30
General - Display:	LCD display featuring an RGB backlight with adjustable color
General - Interfaces, sensors:	1 x RS‑485 (ANSI TIA/EIA‑485): Modbus RTU (Master or Slave), adjustable bus speed 1200 – 115200 bit/s (default 57600 bit/s), configurable transmission mode (default “8N2”, 1 start bit, 8 data bits, parity none, 2 stop bits) 1 x Buzzer 1 x Internal temperature sensor 1 x Internal relative humidity sensor 3 x Digital Input for connection of standard switches and pushbuttons 1 x Universal Input, configurable either for L-TEMP2 (NTC temperature sensor) or for connection of standard switches and pushbuttons 1 x Infrared receiver 1 x EnOcean Wireless Interface conforming to ISO/IEC 14543-3-10 (optional for L-STAT custom versions) LSTAT‑801-Gx-Lxxx: 1 x x Occupancy sensor LSTAT‑802-Gx-Lxxx: 1 x CO₂-Sensor
General - Buttons (capacitive touch):	LSTAT-80x-Gx-Lxx1: 4 x Button with temperature up/down, occupancy, and menu LSTAT-80x-Gx-Lxx2: 6 x Button with temperature up/down, fan up/down, occupancy, and menu LSTAT-80x-Gx-Lxx3: 8 x Button with temperature up/down, fan up/down, light on/off, occupancy, and menu LSTAT-80x-Gx-Lxx4: 8 x Button with temperature up/down,sunblinds up/down, light on/off, occupancy, and menu LSTAT-80x-Gx-Lxx5: 8 x Button with temperature up/down, fan up/down, sunblinds up/down, occupancy, and menu LSTAT-80x-Gx-Lxx6: 8 x Button with temperature up/down, fan up/down, sunblinds up/down, light, and menu
Sensors:
Sensors - Temperature measurement:	Sensor type: capacitive humidity sensor, range: 0% – 100% R.H., resolution: 0.1% R.H., accuracy: ±2% R.H. @ 25 °C, 20% – 80% R.H.; ±3% R.H. @ 25 °C, 0% – 20% R.H. and 80% – 100% R.H., respectively
Sensors - Relative Humidity (R.H.):	Sensor: Kapazitiver Feuchtigkeitssensor, Bereich: 0% – 100% R.H., Auflösung: 0,1% R.H.; Genauigkeit: ±2% R.H. @ 25 °C, 20% – 80% R.H.; ±3% R.H. @ 25 °C, 0% – 20% R.H. bzw. 80% – 100% R.H.
Sensors - Infrared occupancy detector, maximum detection range:	5 m, 64 zones, opening angle horizontal: 94°, vertical: 82°, difference in temperature: target to environment: > 4 °C
Sensors - CO2:	0 – 2000 ppm, ±30 ppm or ±3%
Sensors - Infrared receiver:	NEC protocol (Apple Remote compatible)