Thermal actuators for manifolds and valves

SKU: SE1C

Category: Thermal Actuators

Thermal actuator to be used on manifolds

Auxiliary switch: without

with
Supply voltage: 230 V AC ± 10%, 50/60 Hz

24 V AC ± 10%, 50/60 Hz
Stroke time: 3.5 min

4.5 min

from 23,61 €

incl. 19% VAT , plus

This item has variations. Please select the requested variation.

APPLICATION Electrothermal actuator SE1C is used in underfloor and ceiling heating systems. A temperature regulator can drive the electrothermal actuator by closing a contact. The sensible element inside the capsule spreads out causing the movement of the shaft and opens the valve. Models SE1C24S and SE1C230S have an auxiliary contact that closes when collector is open. When actuator is powered off, the collector is closed

Sensor element:	Special wax
Power consumption:	3 VA
Ambient temperature:	0…50°C
Ambient humidity:	10...90 % RH (non-condensing)
Storage temperature:	-10…+60°C
Peak current:	SE1C24, SE1C24S < 0.25 A SE1C230, SE1C230S < 1 A
Auxiliary switch:	3 A 230 V AC
Cable:	PVC, section 2(4) x 0.50 mm 2 , length 1 m
Connection, actuator:	Metal ring M30 x 1.5
Dimensions:	Ø 48.5 x h 65mm
Material, casing:	Matt polycarbonate, self extinguishing V0 - V1 according to UL94
Weight:	150 g
Protection class:	IP40
Control signal:	On/Off

Datenblatt / Product Sheet

Datenblatt / Product Sheet

Bedienungsanleitung / Instructions

Bedienungsanleitung / Instructions