Immersion sleeve with compression clamp

SKU: TH3/Z

Category: Immersion sleeves

Manufacturer: FuehlerSysteme

Tmax. +200°C
brass sleeve Pmax. 16 bar, R1/2, SW22
stainless steel sleeve Pmax. 40 bar, G1/2, SW24

Working temperature: Tmax. +150°C

Tmax. +200°C
Compressive strength: 16 bar

40 bar
Installation length
Material: stainless steel

brass

Available immediately

from 41,41 €

incl. 19% VAT , plus

This item has variations. Please select the requested variation.

Under the type TH3/Z you can find immersion sleeves with compression clamp as accessories for the temperature sensors. The immersion sleeves are produced as brass and stainless steel. The brass types are suitable for the use in not aggressive media, with a pressure load up 16 bar and +150°C of medium temperature. The stainless steel immersion sleeve have an expanded pressure area up to 40 bar and can be used for a temperature area up to +200°C.

Pressure resistance:	Immersion sleeve stainless steel: Pmax. 40 bar with G1/2 inch; Immersion sleeve brass: Pmax. 16 bar with R1/2 inch
Material:	Immersion sleeve: stainless steel VA 1.4404 or brass nickel plated, Seal: silicone
Dimensions:	Immersion sleeve brass: outside Ø 8 mm / inside Ø 6,5 mm, thread R1/2 inch; Immersion sleeve stainless steel: outside Ø 8 mm / inside Ø 6,5 mm, thread G1/2 inch
Working temperature:	Immersion sleeve stainless steel: -60...+200°C, Immersion sleeve brass: -60...+150°C
Installation:	screw-in thread