Temperature Transducer with remote cable sensor, with silicone cable and contact sensor with tension band, with display, with 2 changeover contacts, 0-10 V or 4-20 mA

SKU: LM1/E

Category: Temperature Transducer

Manufacturer: FuehlerSysteme

-50...+180°C
16 measuring ranges per device
output 0-10 V, 4-20 mA
DIP-switch-technology
optional with LCD-Display
protection type IP65
hinge lock technology

Output temperature: 0-10 V

0-10 V, 2 changer

4-20 mA

4-20 mA, 2 changer
Cable: 2 m silicone (2x0,22 mm²)
MR temp. preset: 0...+100°C
Version: with display

without display

Available immediately

from 151,51 €

incl. 19% VAT , plus

This item has variations. Please select the requested variation.

The LM1/E contact temperature transducer with silicon cable registers the surface temperature on pipelines and converts this measured value into a linear output signal 0-10 V respectively 4-20 mA. As an option the temperature transducer has two potential-free changeover contacts and a backlit display. The display content can be rotated in 90° steps using a menu and the measured value, the switching threshold set, the state of the respective relay, the MIN/MAX measured values for the selected intervals(1 h / 6 h / 12 h / 24 h) etc. can be read out. On the display version the user can, via the menu, specify an individual temperature range. Using the strap, which is included in the scope of delivery, the application block of the temperature transducer can be quickly and securely directly fastened to, for example, the cold or hot water pipes of heating systems.

Manufacturer information:

FuehlerSysteme eNET International GmbH
Röthensteig 11
90408 Nürnberg

+49 911 37322-0
info@fuehlersysteme.de

Measurement range temp.:	-50...+180°C
Measurement range configuration:	1 freely programmable measuring range via the menu input in the display (span min. 25K)
Scales:	-50...0°C, -50...+50°C, -50...+150°C, -30...+20°C, -30...+70°C, -20...+50°C, -20...+80°C, -20...+120°C, -20...+150°C, -10...+15°C, 0...+50°C, 0...+100°C, 0...+150°C, 0...+200°C, 0...+250°C, +10...+35°C
Accuracy:	±0,2 K + max. ±1,5% Span
Supply voltage analog 0-10 V:	24 V AC/DC (±5%)
Supply voltage analog 4-20 mA:	15...36 V DC, depends on liability (Ubmin = 15 V + Rload*0,02A)
Current consumption at 0-10 V:	typ. 10 mA, 30 mA peak current consumption for 50 ms at switching moment at option relay
Current consumption at 4-20 mA:	max. 20 mA / output, 40 mA peak current consumption for 50 ms at switching moment at option relay
Analogue output 0-10 V:	3-wire connection, min. load resistance 100 kOhm
Analogue output 4-20 mA:	2-wire connection (transmitter), max. RLoad(Ohm) = (+Ub - 15 V) / 0,02 A
Alarm output:	2 x potential-free change-over contact, 48 V, 1 A
Switching Hysteresis Relay:	Temperature: 2K (without display), 0,5...5K adjustable (with display)
Electrical connection:	screw terminals max. 1,5 mm²
Display:	optional LCD display with backlight on/off/auto
Cable:	2 m silicone cable (max. +180°C)
Material:	Contacting block: aluminium
Cable gland:	PG11 high-strength cable gland with strain relief
Housing:	Polycarbonate PC UL 94 V0 with hinge locks, color signal white similar to RAL 9003
Dimensions:	Housing: L 89 x W 80 x H 47 mm
Protection type:	IP65
Protection class:	III
Working range r.H.:	0...98% r.H. in contaminant-free, non-condensing air
Working temperature:	Probe: -50...+180°C, Electronic: -20...+70°C
Storage temperature:	-20...+70°C
Installation:	clamping band, band width 9 mm, chucking capacity 50-110 mm, galvanized steel (in scope of delivery)
Approvals:	CE, EAC, RoHS