Temperature Transducer for screw-in mounting, form B and threaded neck tube, 0-10 V or 4-20 mA

SKU: RM2/E

Category: Temperature Transducer

-35...+600°C
output 0-10 V, 4-20 mA
protection type IP65

Output temperature: 0-10 V

4-20 mA
Installation length: 100 mm

200 mm

300 mm

400 mm
MR temp. preset: 0...+600°C

from 362,01 €

incl. 19% VAT , plus

This item has variations. Please select the requested variation.

The RM2/E screwable temperature transducer with connection head form B, neck tube and interchangeable measuring insert registers high temperatures in the range of -35 up to +600°C at a maximum pressure of 40 bar in gaseous and liquid media and converts this measured value into a linear output signal 0-10 V respectively 4-20 mA. Using the stainless steel immersion sleeve, with G1/2 inch thread, the temperature transducer is screwed directly into the container or the pipeline. With the neck tube an better heat dissipation is achieved.

Manufacturer information:

FuehlerSysteme eNET International GmbH
Röthensteig 11
90408 Nürnberg

+49 911 37322-0
info@fuehlersysteme.de

Measurement range temp.:	-35...+600°C
Scales:	-200...0°C, -200...+100°C, -200...+200°C, -200...+400°C, -200...+600°C, -100...0°C, -100...+100°C, -100...+200°C, -100...+500°C, -80...+20°C, -50...+250°C, -50...+500°C, 0...+300°C, 0...+400°C, 0...+500°C, 0...+600°C
Accuracy:	±0,2 K + max. ±1,5% Span
Supply voltage analog 0-10 V:	24 V AC/DC (±5%)
Supply voltage analog 4-20 mA:	15...36 V DC, depends on liability (Ubmin = 15 V + Rload*0,02A)
Current consumption at 0-10 V:	typ. 10 mA
Current consumption at 4-20 mA:	max. 20 mA / output
Analogue output 0-10 V:	3-wire connection, min. load resistance 100 kOhm
Analogue output 4-20 mA:	2-wire connection (transmitter), max. RLoad(Ohm) = (+Ub - 15 V) / 0,02 A
Electrical connection:	push-in terminals, max. 1,5 mm²
Material:	Protection sleeve: stainless steel VA 1.4571
Cable gland:	M20x1,5 cable gland with strain relief
Housing:	terminal head form B , aluminium, colour grey
Dimensions:	Neck tube length: 80 mm
Protection type:	IP65
Protection class:	III
Working range r.H.:	0...98% r.H. in contaminant-free, non-condensing air
Working temperature:	Probe: -35...+600°C, Electronic: -20...+70°C
Storage temperature:	-20...+70°C
Installation:	screw-in thread G1/2 inch
Approvals:	CE, EAC, RoHS