Temperature Transducer for immersion mounting, 1-wire

SKU: TF1/B-1W

Category: 1-Wire

Manufacturer: FuehlerSysteme

-30...+125°C
DS18B20+ digital sensor
protection type IP65

Installation length
Sensor: DS18B20+ (12 Bit, ±0,5 K)
Serial number: dec

hex

n/a
Temperature: -30...+125°C

Low stock level

from 64,11 €

incl. 19% VAT , plus

This item has variations. Please select the requested variation.

The TF1/B-1W immersion sensor measures the temperature in the range of -30 up to +125°C in gasiform medium and converts the measured value into a digital output signal. The resolution of the conversion is configurable from 9-bit to 12-bit (0,5/0,25/0,125/0,0625 K). The 1-Wire protocol allows a cost efficient wiring of multiple sensing devices as series, ring or tree topology in 2- or 3-wire connection. Optionally, each device has a serial number label, whereby a quick and easy start-up is possible. With an optional mounting flange, immersion sleeve or compression clamp the temperature sensor can be mounted directly e.g. on ducts or pipes and replaced quickly and easily in case of service.

Manufacturer information:

FuehlerSysteme eNET International GmbH
Röthensteig 11
90408 Nürnberg

+49 911 37322-0
info@fuehlersysteme.de

Measurement range temp.:	-30...+125°C, -30...+85°C (2-wire connection, parasite powered)
Accuracy:	±0,5 K (-10...+85°C), sonst ±2 K
Sensor:	DS18B20+
Circuit type:	2-, 3-wire connection
Supply voltage:	3...5,5 V
Current consumption:	typ. 1,5 mA
Electrical connection:	screw terminals max. 1,5 mm²
Resolution:	9-12 Bit (+0,5°C up to +0,0625°C)
Installation length:	50-400 mm
Material:	Protection sleeve: stainless steel VA 1.4571
Cable gland:	PG11 high-strength cable gland with strain relief
Housing:	polyamide with snap closing screws, colour white like RAL 9010
Dimensions:	Housing: L 64 x W 58 x H 34,5 mm, Protection sleeve: Ø 6 mm
Protection type:	IP65
Protection class:	III
Working temperature:	-30...+125°C
Storage temperature:	-20...+70°C
Installation:	immersion sleeve, mounting flange, compression fitting (not in scope of delivery)
Approvals:	CE, EAC, RoHS