Signal Converter I/O - 8 Analog IN / Modbus Out for top hat rail mounting, Modbus RTU, 0-10 V or 4-20 mA

SKU: FS1701

Category: Fieldbus Devices

Manufacturer: FuehlerSysteme

8 analog inputs (4-20 mA or 0-10 V)
output Modbus-RTU
DIN rail mounting
parameterization via DIP switch
optional Bus connector

Output: Modbus RTU
Input: 8 x 0-10 V

8 x 4-20 mA

Available immediately

396,47 €

incl. 19% VAT , plus

This item has variations. Please select the requested variation.

The I/O-signal converters can connect standard analog signals (voltage or current) to the Modbus system. The modules can process up to 8 inputs (4-20mA or 0-10 V) simultaneously and make them available via the Modbus-RTU protocol. With this e.g. existing systems with analog field devices can be upgraded to modern digital technology and cabling costs can be reduced. The I/O-signal converters can either be coupled as Modbus slaves to any Modbus master, or they can take over the function of a Modbus master. Addressing and parameterization can be carried out very easily using the DIP switches accessible from the front. The high-quality DIN rail housings are equipped with color-coded push-in terminals to enable quick wiring. Optionally, the DIN rail housings can be upgraded with bus connectors for efficient module communication. The supply and Modbus cabling of the I/O signal converters can thus be considerably simplified. For a higher transmission speed, the I/O signal converters are also equipped with the block formation function.

Manufacturer information:

FuehlerSysteme eNET International GmbH
Röthensteig 11
90408 Nürnberg

+49 911 37322-0
info@fuehlersysteme.de

Supply voltage	24 V DC
Input	Version voltage - 8x 0-10 V DC, configurable, version current 8x 4-20 mA DC, configurable
Output	Modbus RTU
Switching to digital input, channel by channel, max. 24V DC	with voltage version
Resolution	11 BIT
Accuracy	version voltage +/- 10 mV, version current +/- 20 µA
Input resistance	voltage version - 320 kOhm, current version - 50 ohm
Current consumption	max. 50 mA
Assembly	mounting for DIN rails
Plug-in terminals	(blocks of 4) with spring tension, locking of the plug-in terminals, color coding of the terminals, wire diameter max. 1.5 mm²
Pull-up resistors	switchable via on-board DIP switch
Configuration address, modes	via DIP switch onboard
Operating temperature	0… 50 ° C, max. 90% r.H.
Housing	approx. D 100 x W 19 x H 125 mm
Protection class	IP 20
Optional	DIN rail-eNET-system connector (2 required)
Approvals	CE, EAC, RoHs